• Like

  • Follow
Bookmark and Share

Making the Sink Cut Out

Use a jigsaw to cut a sinkhole. A jigsaw allows you great control however be sure to use a new blade. Wear gloves and eye protection when using a jigsaw.
  1. Drill starter holes in opposite corners just inside the cutting line. Don't worry if the cut edge is rough, as the rim of the sink will cover this.

  2. Place the blade of the jigsaw in the starter hole and line up the blade exactly on the cutting line.

  3. Cut along the lien slowly and let the saw do the work.

Ask a helper to support the cut out area so that the piece doesn't drop and cause the saw blade to bind.


Rate This Article From 1 (Lowest) to 5 (Highest)

In the Press

A Moving Company's Moving Story
June, 2012

Relocation.com's survey was recently featured on the front page of USA Today. The headline entitled "Moving in Hard Times" highlighted our results that moving and relocating behaviors were only moderately influenced by the economy.


Our lifestyle survey found that Americans are seeking smaller homes and a suburban lifestyle. These riveting results were recently featured on USAToday.com in an article entitled "American dream shrinks as smaller homes gain favor."

"This user-friendly site includes a blog and a subscription-only newsletter, too"

The Washington Post

"Relocation.com provides you with all the tools you need to get quotes quickly from movers in your area."


The Business Week