• Like

  • Follow
Bookmark and Share

Gluing it Down

The sheet vinyl flooring needs to be glued down properly. Here's how.
  1. Roll about half the sheet loosely

  2. Spread the recommended adhesive around the edge of the room wherever a seam will lie with a V notched trowel.

  3. Let the adhesive set up form about 10- 15minutes until it gets tacky.

  4. Unroll the flooring over the adhesive

  5. Press the underlayment against the flooring using a rolling pin.

  6. To ensure a solid band of adhesive under both pieces for flooring, use a seam on each seam.

Rate This Article From 1 (Lowest) to 5 (Highest)

In the Press

A Moving Company's Moving Story
June, 2012

Relocation.com's survey was recently featured on the front page of USA Today. The headline entitled "Moving in Hard Times" highlighted our results that moving and relocating behaviors were only moderately influenced by the economy.


Our lifestyle survey found that Americans are seeking smaller homes and a suburban lifestyle. These riveting results were recently featured on USAToday.com in an article entitled "American dream shrinks as smaller homes gain favor."

"This user-friendly site includes a blog and a subscription-only newsletter, too"

The Washington Post

"Relocation.com provides you with all the tools you need to get quotes quickly from movers in your area."


The Business Week